Picomed Group

Skip to primary navigation
Skip to main content
Skip to footer

Picomed Norge
Picomed Mobility
Picomed Sverige
Picomed International
Alert-iT Care Alarms
Ansatt

Vi skaper forandringer som sprer glede!

Products
Employees
About us
Contact us

Lukk søkefelt

Vis flere resultater...

Generic selectors

Exact matches only

Search in title

Search in content

Post Type Selectors

Filter by Categories

IR-Receivers

Item no. Picomed: SR2

IR-receiver with one channel ment for 230 VAC. SR2 may be programmed to do different actions when activated: on-off, timer from 1 second-60 minutes or

Picomed IR-receiver SR2

Picomed IRS

Picomed IRS external sensor

Item no. Picomed: 2CIR

Picomed learnable IR receiver 2CIR with 2 channels.

IR receiver that can be programmed with

Picomed IR-receiver 2CIR

Item number: PMIR.

Picomed IR-receiver PMIR, to be intergrated in Picomatic door operators.

PMIR is an learnable IR-receiver that communicates with Picomatic DA430, DA460, DA461 and Tormax 1201. It is powered from Picomatic via cable (included). Can be connected to IR-sensor. Can be programmed as,

Picomed IR-receiver PMIR

Picomed IR-receiver 4CIR

Item number: 2CIRMB

Picomed learnable IR receiver 2CIR with 2 channels with window and marquee switch.

2CIR MB and 4CIR MB are based on the IR-receivers 2CIR and 4CIR. The MB versions are built into «duo-boxes» which includes switches marked «up» and «down». These switches are connected to the IR-receiver and will control the receivers in parallel with the IR-signal. In this way it may control i.e awnings with IR-signals or switches depending on the users need.

2CIR MB and 4CIR MB are delivered with «2 pole switching» enabled. When this function is enabled, 2 and 2 relays (1 & 2 or 3 & 4) will be activated at the same time. The 2 pairs are interlocked and it is not possible to activate channel 3 & 4 if channel 1 & 2 already are activated and v.v. This function permit a safe connection of opposite polarities without a risk of short circuit.

The MB-versions have the same electrical specifications as the IR-receivers 2/4CIR: potential free relays, learnable IR and they are capable to control 2 A@30 VDC.

They have connections for the IR-sensor IRS.

Produced and developed in Norway

Documents:
User manual

Picomed IR-receiver 2CIRMB

Item number: 4CIRMB

Picomed learnable IR receiver 4CIR with 4 channels with window and marquee switch.

2CIR MB and 4CIR MB are based on the IR-receivers 2CIR and 4CIR. The MB versions are built into «duo-boxes» which includes switches marked «up» and «down». These switches are connected to the IR-receiver and will control the receivers in parallel with the IR-signal. In this way it may control i.e awnings with IR-signals or switches depending on the users need.

2CIR MB and 4CIR MB are delivered with «2 pole switching» enabled. When this function is enabled, 2 and 2 relays (1 & 2 or 3 & 4) will be activated at the same time. The 2 pairs are interlocked and it is not possible to activate channel 3 & 4 if channel 1 & 2 already are activated and v.v. This function permit a safe connection of opposite polarities without a risk of short circuit.

The MB-versions have the same electrical specifications as the IR-receivers 2/4CIR: potential free relays, learnable IR and they are capable to control 2 A@30 VDC.

They have connections for the IR-sensor IRS.

Produced and developed in Norway

Documents:
User manual

Picomed IR-receiver 4CIRMB

Footer

Picomed AS
Brokelandsheia
Gjerstadveien 398
4993 Sundebru
Norway
Org.nr: 962 211 631 MVA

Kontaktdetaljer
Telefon: +47 37 11 99 50

E-post: post@picomed.no

PÅMELDING NYHETSBREV

GÅ TIL NORSKE SIDER

Retur- og angrerett
Personvern
Kjøpsbetingelser

Picomed Mobility AS
Picomed Teknikk AS
Picomed Sweden
Alert-it Care Alarms

Wordpress løsning levert av Imbera

0

0

Handlekurv

Din handlekurv er tom

Fortsett å handle